User's Manual

20-405 User’s Guide DRAFT
To turn delay off, press •/DELAY while the scanner is monitoring a channel or frequency. DLY
disappears.
To turn delay on:
• If the scanner is scanning and stops on an active channel, quickly press •/DELAY before it
resumes.
• If the desired channel is not selected, manually select the channel, then press •/DELAY.
• If the scanner is searching, press •/DELAY. DLY appears and the scanner adds a two-second
delay to every transmission it stops on in that bank.
Locking Out Channels and Frequencies
You can increase the scanning or search speed by locking out channels or frequencies that have a
continuous transmission, such as control channels, weather channels, or birdie frequencies.
Press L/O when the scanner stops on a channel or frequency while scanning or searching (except
weather bank). The scanner locks out the channel/frequency then continues scanning/searching.
To manually lock-out a channel, select the channel then press L/O. L/O appears in the display.
Notes:
• Your scanner automatically locks out empty channels.
• You can still manually select locked-out channels.
• You can lock-out a maximum of 50 frequencies during a search. If you try to lock-out more, L-O
Fr-FULL appears.
Reviewing and Removing Lock-outs
Stored Channels
Manually select the channel and press L/O until L/O disappears.
Page 22