User's Manual

20-405 User’s Guide DRAFT
Notes:
• Press •/DELAY to turn the two-second delay feature on and off.
• Press L/O to lock-out a frequency.
• Press PSE to pause searching. Press PSE again, to resume.
Service Bank Search
Your scanner contains groups of preset frequencies called Service Banks. You can search for marine,
fire/police, aircraft, ham, weather, and FM broadcast even if you do not know the specific frequencies
you find into the scanner’s channels (except for weather and marine banks, which are already stored
as channels. See “Listening to the Marine Bank” and “Listening to a Weather Channel”).
1. Press MARINE, FD/PD, AIR, HAM, WX, or FM radio. MAr, FIrE POLICE, AIr, HAM, WEAtHEr,
or FM. appears respectively. After about two seconds, the service search starts.
2. To search for another active frequency in the selected bank, press UP or DOWN.
See “Preprogrammed Service Bank Frequencies” on page X for a list of the frequencies.
Notes:
• Press •/DELAY to turn the two-second delay feature on and off.
• Press L/O to lock-out a frequency
• Press PSE to pause searching. Press PSE again to resume.
• To reverse the search direction at any time, press UP or DOWN.
• If necessary, you can select search groups using the number keys.
• The frequencies in the scanner’s Service Banks are preset. You cannot change them.
Storing Found Frequencies into Channels
Once you find interesting frequencies during a Tune, or Service Bank search, you can store them in
the scanner’s channel-storage banks.
1. Press ENT when you find a frequency. The bank number and StorE appear.
Page 15