User Manual

PSR-410 O/Manual

SWPR Menu Reference

The SWPR

menu is used when creating new Spectrum Sweeper objects, or editing existing Spectrum

Sweeper objects. All menus are shown in the scanner's display as a three line window that can be scrolled

up or down to access the various different parameters. The active parameter is always the middle

parameter and is indicated by a flashing “:”. The entire SWPR menu is shown below:

SWPR Parameter Options Description

Scan Lists On or Off for Scan Lists

1-22

Sets membership in Scan Lists. Use

<> keys to scroll through Scan Lists.

Use SEL key to toggle Scan List

membership. A “*” next to the Scan

List number indicates that the object

is mapped to that Scan List.

Type All Bands or Pub Safety Use <> to select All Bands or Public

Safety. All Bands covers the entire

frequency range of the scanner.

Public Safety covers frequency

ranges commonly used for public

safety communications.

Sub-bands <>, SEL

* appears at left of the

sub-band number,

selected sub-band is

active.

Sub bands are available when using

SWPR in All Bands or Public Safety

mode. In All Bands, the sub bands

are defined as follows:

0: 25-54 MHz

1: 108-136.99166 MHz

2: 137-174 MHz

3: 216.0025-299.975 MHz

4: 300-405.9875 MHz

5: 406-470 MHz

6: 470.0125-512 MHz

7: 764-767 MHz

769-776 MHz

794-796.996875 MHz

8: 806-868.9875 MHz*

9: 896-960 MHz

1240-1300 MHz

* Exzcludes frequencies utilized by

Page