User Manual

PSR-410 O/Manual
in MHz
upper limit for the limit search range
Tag Alpha-numeric text The alphanumeric display name for
the LMIT search. Use the standard
text entry method or QTXT to name
the object.
L/Out On or Off Permanent lockout for the LMIT
channel. Also accessed by pressing
FUNC L/OUT while the scanner is
stopped on the LMIT object.
LED Mode Solid or Flash Controls whether the ALERT LED
flashes or remains on solid when the
ALERT LED is used.
LED Color 0-7 Sets LED color to 0-7 as defined in
the GLOB menu. By default, 0=LED
Off, 1=Red, 2=Yellow, 3=Green,
4=Cyan, 5=Blue, 6=Magenta,
7=White.
Latch LED On or Off Normally the ALERT LED is active
only while the object is receiving a
transmission. When Latch is on, the
ALERT LED will remain lit after the
transmission is complete, unless
overridden by a subsequent object
that is also using the ALERT LED.
Backlight On, Off or Flash Controls whether the backlight
should be on, off or flashing while the
object is active.
Alarm None, Chirp, Hi-Lo, Alert,
Ring, 2-Chirp, Fast Hi-Lo,
DTMF#
Sets the Audible Alarm for the LMIT
object. When an Audible Alarm is
selected, the selected alarm will play
anytime the scanner stops for activity
on the LMIT object while scanning.
Fav On or Off When On, the LMIT object is a
member of the Favorites Scan List.
EXPERT BELOW
Modulation AM, FM, Auto Modulation setting for the LMIT
search. In most cases Auto will work
fine. Use AM to override and force
AM modulation, FM to force FM
Page
78