User Manual

PSR-410 O/Manual
Threshold
Lo 1-99 Available when Multi-Site is set to
ROAM. Sets the control channel
decode % threshold for a site to be
considered out of range, which will
begin the process of looking for a
new site.
Check All CC Yes or No Available when Multi-Site is set to
Stat.
T Tables Default, Splinter, Custom For Motorola systems only - sets
custom channel tables. Use <>,to
select option, press SEL on Custom
to enter custom table information
Fleet Map TypeII, E1P1, E1P2, E1P3,
E1P4, E1P5, E1P6, E1P7,
E1P8, E1P9,
E1P10E1P11, E1P12,
E1P13, E1P14, E1P15,
E1P16, CUATOM
For Motorola Type I systems only -
sets fleet map
AutoMove HRs On or Off For LTR systems only – sets Home
Repeater AutoMove
LMIT Menu Reference
The LMIT menu is used when creating new Limit Search objects, or editing existing Limit Search objects.
All menus are shown in the scanner's display as a three line window that can be scrolled up or down to
access the various different parameters. The active parameter is always the middle parameter and is
indicated by a flashing “:”. The entire LMIT menu is shown below:
LMIT Parameter Options Description
Scan Lists On or Off for Scan Lists
1-22
Sets membership in Scan Lists. Use
<> keys to scroll through Scan Lists.
Use SEL key to toggle Scan List
membership. A “*” next to the Scan
List number indicates that the object
is mapped to that Scan List.
FrLo Any supported frequency
in MHz
A frequency that will be used as the
lower limit for the limit search range
FrHi Any supported frequency A frequency that will be used as the
Page
77