User Manual

PSR-410 O/Manual
all act
ivity on this TSYS
Dwell 0-200 x 100 mS Sets the amount of time the scanner
dwells on a Motorola, or EDACS
system control channel for activity on
programmed talkgroups. Use 0 for
automatic mode, which uses control
channel information to determine
when all current talkgroup
information has been broadcast by
the system.
Multi-Site Off, Roam or Stat
(Stationary)
Used with networked Motorola
trunked radio systems. When
Multi-Site=Off, the scanner will find
the first usable control channel in the
control channel list and use it to track
the system. When Multi-Site=ROAM,
the scanner will always attempt to
lock on to control channels where the
decoding quality is greater than
Threshold Hi, and will search for new
control channels when the decoding
quality of a control channel drops
below Threshold Lo, and, if no
control channels are available that
meet the Threshold Hi criteria, the
scanner will seek the best control
channel to use, and continue
checking periodically for a new
control channel that meets the
Threshold Hi criteria. When
Multi-Site=STAT, the scanner will
track the system using every usable
control channel in the control channel
list.
Threshold Hi 1-99 Available when Multi-Site is set to
ROAM. Sets the control channel
decode % threshold for a site to be
considered good when looking for a
new site.
Page
76