User Manual

PSR-410 O/Manual
Backlight
On, Off or Flash Controls whether the backlight should be
on, off or flashing while the object is
active.
Alarm None, Chirp, Hi-Lo,
Alert, Ring, 2-Chirp,
Fast Hi-Lo, DTMF#
Sets the Audible Alarm for the TGRP
object. When an Audible Alarm is
selected, the selected alarm will play at
the beginning of each transmission on
the TGRP object, or anytime the scanner
stops for activity on the TGRP object
while scanning.
Fav On or Off When On, the TGRP object is a member
of the Favorites Scan List.
Skywarn On or Off When On, the CONV object is a member
of the Skywarn Scan List.
EXPERT BELOW
Delay On or Off Controls whether a Delay is used to wait
for reply traffic after a transmission on
the TGRP.
Delay Time 1-200 x 100 mS Sets the amount of time (in 100
millisecond intervals) for the wait for
reply delay if Delay is On, e.g., 20=2
seconds.
AudioBoost On or Off Applies a 6 dB boost to audio levels
when the object is active
Hit Count Numeric value Increments each time a transmission is
received on the SWPR object. Global
“Hit Counts” must be set to ON. Press
the Dflt softkey to reset to 0.
TSYS Menu Reference
The TSYS menu is used when creating new Trunking System objects, or editing existing Trunking System
objects. All menus are shown in the scanner's display as a three line window that can be scrolled up or
down to access the various different parameters. The active parameter is always the middle parameter and
is indicated by a flashing “:”. The entire TSYS menu is shown below:
TSYS Parameter Options Description
Type MOT 800/900, MOT Sets the trunking system type.
Page
74