User Manual

PSR-410 O/Manual
SEL
key to toggle Scan List
membership. A “*” next to the Scan List
number indicates that the object is
mapped to that Scan List.
TSYS New or previously
stored trunking system
object (TSYS)
To enter a new trunking system, use the
<> keys to scroll through the stored
systems until NEW appears, then press
SEL to enter the parameters for the new
TSYS. To use a trunking system that you
have previously entered, use the <>
keys to scroll to the desired system.
ID Decimal, hex, AFS, or
Wildcard depending on
TSYS type
The digital address of the talkgroup or
individual radio ID on the trunked radio
system.
Type Group or Private Use Group for talkgroup ID, Private for
individual radio ID.
Tag Alpha-numeric text The alphanumeric display name for the
TGRP. Use the standard text entry
method or QTXT to name the object.
L/Out On or Off Permanent lockout for the TGRP. Also
accessed by pressing FUNC L/OUT
while the scanner is stopped on the
TGRP object.
Priority On or Off Turns Priority Mode on or off for the
TGRP object.
LED Mode Solid or Flash Controls whether the ALERT LED
flashes or remains on solid when the
ALERT LED is used.
LED Color 0-7 Sets LED color to 0-7 as defined in the
GLOB menu. By default, 0=LED Off,
1=Red, 2=Yellow, 3=Green, 4=Cyan,
5=Blue, 6=Magenta, 7=White.
Latch LED On or Off Normally the ALERT LED is active only
while the object is receiving a
transmission. When Latch is on, the
ALERT LED will remain lit after the
transmission is complete, unless
overridden by a subsequent object that
is also using the ALERT LED.
Page
73