User Manual

PSR-410 O/Manual
DupeChecksSQ
Yes or No If set to Yes, dupe checking will check
both the stored frequency and any
encoded squelch settings when
checking for duplicate CONV objects.
TGID Format Norm, DEC or HEX Selects TGID display format
TGRP Ignore Yes or No If set to Yes, TGRP wildcards will ignore
calls on previously stored TGRPs that
are mapped to disabled Scan Lists.
ShowCCInfo Yes or No For Motorola systems, shows current
control channel index (from TSYS
frequency list) and frequency alternating
with the voice frequency.
Set password SEL Enters power-on password for use this
scanner.
CONV Menu Reference
The CONV menu is used when creating new Conventional Channel objects, or editing existing
Conventional Channel objects. All menus are shown in the scanner's display as a three line window that
can be scrolled up or down to access the various different parameters. The active parameter is always the
middle parameter and is indicated by a flashing “:”. The entire CONV menu is shown below:
CONV Parameter Options Description
Scan Lists On or Off for Scan
Lists 01-22
Sets membership in Scan Lists. Use <>
keys to scroll through Scan Lists. Use
SEL key to toggle Scan List membership.
A “*” next to the Scan List number
indicates that the object is mapped to
that Scan List.
Freq Any supported
frequency in MHz
The frequency that the CONV object will
use.
Tag Alpha-numeric text The alphanumeric display name for the
CONV channel. Use the standard text
entry method or QTXT to name the
object.
Sq Mode Search, None,
CTCSS, DCS
Sets subaudible squelch mode. Use
Search to automatically analyze signals
to determine squelch mode and code.
Page
70