User Manual

PSR-410 O/Manual

reduce interference from

strong nearby

transmitters. Global attenuator mode

applies attenuation radio-wide,

regardless of individual object settings.

In Normal attenuator mode, the

attenuator follows the individual object

attenuator setting.

Global Atten On or Off When the ATTEN mode is set to

Global, this controls whether the Global

attenuator is on or off.

Clear Hits SEL Press SEL to clear all hit counters.

Hit Counts Yes or No Turns the hit counter feature on or off.

Dflt ScanList 0-22 Sets default destination Scan Lists for

new objects and CONV Stor from

Searches, Spectrum Sweeper and

Tune. Use 1-20 for “normal” Scan Lists

1-20. Use 0 for the “ns” (not scanned)

Scan List (no Scan List mappings are

specified). Use 21 for the FAV Scan

List. Use 22 for the SKYWARN Scan

List.

Priority On or Off Turns Priority Scan On or Off. Priority

Scan can also be toggled by pressing

FUNC PRI while scanning.

WxPri Each WX frequency or

Off

Select weather frequency or off. Also

accessed by pressing WX, then PRI

Scan Lists SEL Enters sub menu for Scan List settings

and status

SRCH L/Outs SEL Enters sub menu for review, editing or

deletion of search lockout frequencies

Clear FAV SEL Press SEL to clear the Favorites Scan

List.

Memory Info SEL Press SEL to see the current memory

usage.

EXPERT BELOW

Tune LED On or Off Activates Signal Strength driven LED

when in TUNE mode.

Color 0-7 Red/Green/Blue (RGB)

value

Sets intensity of red, green and blue

LEDs. Press SEL to edit colors. Use <>

Page