User Manual

PSR-410 O/Manual

If initializing

the global parameters to factory defaults does not resolve your problem, you may wish to

initialize the entire scanner to factory defaults. This operation will result in the clearing of your programmed

data and the loss of any custom changes you have made to the radio's global parameters. Use this option

as a last result.

NOTE: This procedure clears all information you stored in the scanner's working memory, AND resets the

global parameters to factory defaults. Initialize the scanner only when you are sure the scanner is not

working properly.

1. Turn off the scanner, then turn it on again. The scanner briefly displays the Welcome/Owner screen.

2. Press 0 while the scanner is displaying the Welcome/Owner screen. The scanner displays

System Tests:

Select a Test...

Exits if no key

is pressed

3. Press 1. The scanner displays

Factory Init

Erase Memory

ENTER if APPROVE

CLEAR to EXIT

4. Press ENT. The scanner displays

Initializing the

File System

Please Wait.....

Then,

File System

Initialized to

Defaults.

Press any key.

5. Press any key on the keypad to proceed. The scanner will next display:

GLOB EEPROM area

Page