User Manual

PSR-410 O/Manual
Home Repe
ater and Group ID of the LTR
talkgroup
Motorola analog voice channel VC: lsTGID-nnnnn
where lsTGID shows the decoded talkgroup
ID data from the lowspeed data stream
Please note that the analog lowspeed data
protocol does not provide error correction,
and some false “VC: lsTGID” readings
should be expected.
You may wish to use the PSR-410's Tune LED feature to obtain a visual indication of signal strength using
the tri-color LED. To activate the Tune LED, press PROG, then the GLOB softkey. Press the v key until
Tune LED: Off appears in the display. Use the <> keys to toggle Tune LED on or off, then press the SAVE
softkey to save your changes to the radio's configuration memory.
Using dedicated Limit and Service search modes
The SRCH key provides immediate access to the dedicated search modes of your PSR-410. Pressing the
SRCH key cycles through each search mode in this order: Limit, Railroad, Public Safety, Aircraft, Ham, CB,
Marine, and FRS/GMRS/MURS/DOT.
LMIT Search Mode
Your scanner's dedicated LMIT search mode provides you with the ability to create a limit search with a
search frequency range between upper and lower limit frequencies that you specify and perform the limit
search directly without creating a new LMIT object. You can then monitor that frequency range for
transmissions.
To enter LMIT mode, press the SRCH key on the keypad repeatedly until the display indicates LMIT search
as follows:
illust
Use the Lmts softkey to set the lower and upper frequency limits for your limit search.
NOTE: When a signal is being received, the Lmts softkey (F1) changes to FrL/O. You can access the Lmts
softkey by pressing FUNC F1 when the F1 key function is FrL/O.
Press the ^ or v keys on the 5-way pushbutton pad to change the search direction.
Page
50