User Manual

PSR-410 O/Manual

sub-band you wish to

enable or disable. Disabling a sub-band will cause the Spectrum Sweeper system to

skip the frequencies within that sub-band as it performs its sweeps. The sub-bands are defined as follows:

0: 25-54 MHz VHF Low Band

1: 108-136.99166 MHz VHF Aircraft Band

2: 137-174 MHz VHF High Band

3: 216.0025-299.975 MHz 220 MHz Commercial/Amateur Band

4: 300-405.9875 MHz UHF Military Air Band

5: 406-470 MHz UHF Band

6: 470.0125-512 MHz UHF-T Band

7: 764-767 MHz 700 MHz Band

769-776 MHz

794-796.996875 MHz

8: 806-868.9875 MHz* 800 MHz Band

9: 896-960 MHz 900 MHz Band, 23 cm Amateur Band

1240-1300 MHz

* Exzcludes frequencies utilized by the Cellular Mobile Radiotelephone Service 824-848.9875 MHz and

869-893.9875 MHz.

In Public Safety, the sub bands are defined as follows:

0: 33.42-46.5 MHz VHF Low Band

1: 151.82-170.15 MHz VHF High Band

2: 453.003125-467.7125 MHz UHF Band

3: 764.003125-766.996875 MHz 700 MHz Band

769.003125-775.998675 MHz

794.003125-796.996875 MHz

4: 806.0125-868.996875 MHz 800 MHz Band

Using dedicated TUNE mode

Your scanner's dedicated TUNE mode provides you with the ability to quickly enter any frequency and

monitor that frequency for transmissions, or search up or down from that frequency for activity.

To enter TUNE mode, press the TUNE key on the keypad. The scanner displays the TUNE screen.

illust

By default, TUNE mode is paused when first activated. Press PAUSE to begin searching from the current

Page