User Manual

PSR-410 O/Manual
When AutoMove HRs is turned on, you may e
nter the LTR system frequencies in any order, and the
PSR-410 will automatically move the frequencies to the proper home repeater slots as transmissions are
received on the system.
Priority Scan
Your PSR-410 scanner features Priority Scan operation for CONV and TGRP objects. When Priority Scan
is active, increased priority is given to objects that have their Priority mode set to ON.
Turning Object Priority On or Off
Priority for CONV and TGRP objects can be toggled on or off using the following methods:
Press the PRI key when the scanner stops on the object while it is active. The plD indicator in the object
display will show p for Object Priority Off, and P for Object Priority On.
Browse to an object in Manual Mode or Program mode, then press the PRI key to toggle Object Priority on
or off. The plD indicator in the object display will show p for Object Priority Off, and P for Object Priority On.
Browse to an object in Program mode. Press the EDIT, then CURR softkeys. Use the v key to scroll to the
Priority setting. Use the < or > keys to toggle Priority On or Off.
When creating a new object, before saving the object scroll to the Priority setting. Use the < or > keys to
toggle Priority On or Off.
Turning Priority Scan Mode On or Off
While the radio is scanning, press FUNC, then PRI to toggle Priority Scan On or Off. Priority Scan status is
shown in the man Scanning status display. PRI indicates that Priority Scan mode is on, and pri indicates
that Priority Scan mode is off.
CONV Priority Scan
When Object Priority is set to Yes for one or more CONV objects, the scanner will sample the CONV
objects for activity periodically while scanning and monitoring other objects.
This sampling will cause a brief muting of received audio when it occurs while another object is active.
The more CONV objects are set for Priority, the longer this audio muting will be, since it takes a certain
Page
44