User Manual

PSR-410 O/Manual
If you wish to
remove permanent lockout from an object, navigate to the object using the 5-way pushbutton
pad while in Manual Mode or Program mode and press FUNC, then L/OUT again.
HINT: You can also toggle lockout anytime you are viewing an object menu in Program mode by pressing
L/OUT.
Search Lockout
Search lockout works with certain search objects, including LMIT searches, some SRVC searches, and
SWPR objects. Frequency lockout is used to lock out undesired frequencies that are found during
searches.
To apply search lockout during a search, press the FrL/O softkey while the scanner is stopped on the
undesired frequency:
illust
Applying search lockout to an undesired frequency adds that frequency to the Search Lockout List, a list of
frequencies that the scanner ignores when performing searches or during Spectrum Sweeper operations.
You can edit or clear the Search Lockout List by following these steps:
Press PROG
Press the GLOB softkey
Scroll down to the SRCH L/Outs: item and press SEL
Scroll to the frequencies you wish to remove from the lockout list and press the Del softkey to remove them
from the list.
Scroll to an empty spot and enter any frequency you wish to manually add to the list.
Press FUNC, then the Del softkey to clear the entire list.
Talkgroup Lockout
Talkgroup lockout is similar to search lockout, as it allows you to lockout undesired talkgroups while
searching for new talkgroup activity with wildcard TGRP objects.
To apply lockout on an undesired wildcard hit, press the TGL/O softkey while the scanner is stopped on the
Page
40