User Manual

PSR-410 O/Manual
F
AV - Activates Favorites Scan Mode, FUNC FAV adds the current object to the Favorites Scan List
WX - Activates Weather scan, FUNC WX activates Skywarn mode
PROG - Places scanner in Program Mode for editing radio-wide options, adding new objects or editing
existing objects
L/OUT - Toggles Temporary Lockout on active or selected object, FUNC L/OUT applies permanent lockout
(can be changed in the GLOB menu)
ENT - Enter key
PAUSE - Pauses scan or search operation on active object
Getting Started
First Time Startup
We believe that your new PSR-410 is so easy to use that scannists with minimal experience in the hobby
should be able to get up and running in a matter of just a few minutes. If you already know the difference
between a conventional channel and a talkgroup, or a search range and a Spectrum Sweeper, we invite
you to dive right in and set the radio up to begin scanning your first objects. If you get stuck, you can refer to
this Getting Started section, or see the relevant sections in the Detailed Menu Reference. Otherwise,
please read on and allow us to help you get acquainted to your new scanner!
WARNING: Always protect your scanner from exposure to extreme heat or cold temperatures.
WARNING: Your scanner is not waterproof. Do not expose it to rain, extreme high humidity or moisture.
WARNING: The external DC power input is designed to accept 12-14.4 VDC using a tip-positive coaxial
power plug. Do not connect the radio to external power sources that are greater than 16.0 VDC. Ensure
that the DC polarity is correct before connecting your radio to an external power source. Turn the radio off
prior to connecting or disconnecting external power.
Unpack the radio
Unpack your radio carefully. Save all documentation and packing materials in case it is necessary to return
your scanner for repair.
Base operation
The mounting bracket can serve as a desktop stand when it is attached such that it is positioned
underneath the radio. You may also use the mounting bracket indoors to attach the radio underneath a
table or shelf by installing the mounting bracket such that it is positioned on top of the radio.
Attach the three self-adhesive rubber feet to the bottom of the mounting bracket in the spaces provided.
Page
11