User Manual

PSR-410 O/Manual
BAR
Signal meter indicating strength of the received signal.
^ v Menu position and search direction indicators.
Understanding the Keypad
Your PSR-410 features an easy-to understand backlit keypad with 34 keys that are used to control and
program the radio. Figure 5 highlights the various keys and their basic functions.
illust
Figure 5 - Keypad layout
Softkeys
F1, F2, F3 - activate function shown in the LCD display immediately above the softkey.
Five Way Pushbutton Pad
^ v < > keys are used for navigation while browsing objects and menus. SEL key activates data entry fields
and toggles Scan List selection in object menus. FUNC SEL activates context sensitive help in menus.
Numeric Keypad
Used for data entry of frequencies, talkgroup IDs and alphanumeric labels. Used while scanning, 1-9 and 0
toggle Scan Lists 1-10 on and off. FUNC 1-9 and 0 toggle Scan Lists 11-20 on and off.
./DELAY – Enters a decimal point (necessary when programming frequencies), space. FUNC ./DELAY
programs delay time for the selected channel/search bank.
Operation Keys
FUNC - Activates alternate key functions. FUNC key operation is very intuitive - typically it “amplifies” the
keypress that follows it.
DIM – Controls backlight brightness.
MAN - Places scanner in Manual Mode for monitoring single objects.
SCAN - Places scanner in Scan Mode for scanning enabled objects, FUNC SCAN launches Spectrum
Sweeper.
TUNE - Allows direct tuning of any valid frequency, FUNC TUNE loads the current or most recently
scanned frequency into TUNE
SRCH - Dedicated Search mode for service and frequency searches
ATT - Toggles Attenuator on and off, FUNC ATT toggles Global Attenuator mode
PRI - Toggles the Priority setting for selected or active object, FUNC PRI toggles Priority Mode on or off for
the scanner
Page
10