User's Manual

NOTE: <battH> is ORed with 0x80 when on external power

sq:

bit 0: RF Squelch state

bit 1: Unmuted state

bit 2: /XF state (IMBE detect)

bit 3: HD2 state (in DG detect, in CTCSS/DCS, reverse burst/turn off code detect)

bit 4: HD5 state (CTCSS/DCS/NAC detect)

bit 5: set to 1 if Mobile (PSR-600), 0 otherwise

bit 6: set to 1 if bit 5 == 1 and backlight level is "Dim"

Get LCD

Command:

STX L ETX <sum>

Response:

STX L <lcd0> <lcd1> ... <lcd63> <icons1> <icons2> ETX <sum>

NOTE: <icons1> and <icons2> are bitmapped representations of display icon status, as follows:

icons1:

bits 0-2: RSSI bars level, 0-5

bit 3: S icon

bit 4: Batt icon ON

bit 5: Batt icon BLINKING

icons2: