User's Manual

custom channel tables. Use <>,to
select option, press SEL on Custom
to enter custom table information
Fleet Map TypeII, E1P1, E1P2, E1P3,
E1P4, E1P5, E1P6, E1P7,
E1P8, E1P9,
E1P10E1P11, E1P12,
E1P13, E1P14, E1P15,
E1P16, CUATOM
For Motorola Type I systems only -
sets fleet map
LMIT Menu Reference
The LMIT menu is used when creating new Limit Search objects, or editing existing Limit Search objects.
All menus are shown in the scanner's display as a three line window that can be scrolled up or down to
access the various different parameters. The active parameter is always the middle parameter and is
indicated by a flashing “:”. The entire LMIT menu is shown below:
LMIT Parameter Options Description
Scan Lists On or Off for Scan Lists
1-22
Sets membership in Scan Lists. Use
<> keys to scroll through Scan Lists.
Use SEL key to toggle Scan List
membership. A “*” next to the Scan
List number indicates that the object
is mapped to that Scan List.
FrLo Any supported frequency
in MHz
A frequency that will be used as the
lower limit for the limit search range
FrHi Any supported frequency
in MHz
A frequency that will be used as the
upper limit for the limit search range
Tag Alpha-numeric text The alphanumeric display name for
the LMIT search. Use the standard
text entry method or QTXT to name
the object.
L/Out On or Off Permanent lockout for the LMIT
channel. Also accessed by pressing
FUNC L/OUT while the scanner is
stopped on the LMIT object.
LED Mode Solid or Flash Controls whether the ALERT LED
flashes or remains on solid when the