User's Manual

member of the Favorites Scan List.
Skywarn Yes or No When Yes, the CONV object is a
member of the Skywarn Scan List.
EXPERT BELOW
Delay On or Off Controls whether a Delay is used to wait
for reply traffic after a transmission on
the TGRP.
Delay Time 1-200 x 100 mS Sets the amount of time (in 100
millisecond intervals) for the wait for
reply delay if Delay is On, e.g., 20=2
seconds.
AudioBoost On or Off Applies a 6 dB boost to audio levels
when the object is active
Hit Count Numeric value Increments each time a transmission is
received on the SWPR object. Global
“Hit Counts” must be set to ON. Press
the Dflt softkey to reset to 0.
TSYS Menu Reference
The TSYS menu is used when creating new Trunking System objects, or editing existing Trunking System
objects. All menus are shown in the scanner's display as a three line window that can be scrolled up or
down to access the various different parameters. The active parameter is always the middle parameter and
is indicated by a flashing “:”. The entire TSYS menu is shown below:
TSYS Parameter Options Description
Type MOT 800/900, MOT
VHF/UHF, EDACS STD,
EDACS NAROW, LTR
Sets the trunking system type.
Choose MOT800/900 if the system is
a Motorola 800 or 900 MHz analog or
digital trunked radio system that uses
the 3600 baud control channel. Use
EDACS STD for most 800 MHz
EDACS systems using the 9600 BPS
EDACS control channel. Use
EDACS NAROW for most 900 MHz
and some VHF/UHF EDACS
systems using the 4800 BPS EDACS
control channel. Use LTR for Logic