User's Manual

ID Decimal, hex or AFS
depending on TSYS
type
The digital address of the talkgroup or
individual radio ID on the trunked radio
system.
Type Group or Private Use Group for talkgroup ID, Private for
individual radio ID.
Tag Alpha-numeric text The alphanumeric display name for the
TGRP. Use the standard text entry
method or QTXT to name the object.
L/Out On or Off Permanent lockout for the TGRP. Also
accessed by pressing FUNC L/OUT
while the scanner is stopped on the
TGRP object.
Priority On or Off Turns Priority Mode on or off for the
TGRP object.
LED Mode Solid or Flash Controls whether the ALERT LED
flashes or remains on solid when the
ALERT LED is used.
LED Color 0-7 Sets LED color to 0-7 as defined in the
GLOB menu. By default, 0=LED Off,
1=Red, 2=Yellow, 3=Green, 4=Cyan,
5=Blue, 6=Magenta, 7=White.
Latch LED On or Off Normally the ALERT LED is active only
while the object is receiving a
transmission. When Latch is on, the
ALERT LED will remain lit after the
transmission is complete, unless
overridden by a subsequent object that
is also using the ALERT LED.
Backlight On, Off or Flash Controls whether the backlight should be
on, off or flashing while the object is
active.
Alarm None, Chirp, Hi-Lo,
Alert, Ring, 2-Chirp,
Fast Hi-Lo, DTMF#
Sets the Audible Alarm for the TGRP
object. When an Audible Alarm is
selected, the selected alarm will play at
the beginning of each transmission on
the TGRP object, or anytime the scanner
stops for activity on the TGRP object
while scanning.
Fav Yes or No When Yes, the TGRP object is a