User's Manual

display time for the secondary display
element.
LCD BlinkOn 1-250 x 10 mS For alternating text displays, sets the
display time for the primary display
element.
LED BlinkOff 1-250 x 10 mS When the ALERT LED setting for an
object is set to Flash, this is the amount
of time the LED stays turned off.
LED BlinkOn 1-250 x 10 mS When the ALERT LED setting for an
object is set to Flash, this is the amount
of time the LED stays turned on.
Pri Channels 0-250 Number of priority CONV channels to
check during a priority scan sampling.
“0” samples all CONV priority channels.
Pri Interval 2-100 x 100 mS Conventional frequency priority sample
interval.
TGRP Pri Int On or Off Toggles priority interrupt scanning during
trunked calls
QuickPriRtn On or Off When on, does not wait for verification of
correct CTCSS, or DCS when returning
to an active CONV channel after priority
sampling
Search Delay 1-100 x 100 mS Sets wait for reply delay for all search
modes
TLO=FUNC L/O Yes or No Controls the operation of the L/OUT key.
When No, pressing L/OUT performs a
Temporary Lockout of the selected
object. When Yes, pressing L/OUT
performs a Permanent Lockout of the
selected object.
DupeChecksSQ Yes or No If set to Yes, dupe checking will check
both the stored frequency and any
encoded squelch settings when
checking for duplicate CONV objects.
TGID Format Norm, DEC or HEX Selects TGID display format
TGRP Ignore Yes or No If set to Yes, TGRP wildcards will ignore
calls on previously stored TGRPS that
are mapped to disabled Scan Lists.
ShowCCInfo Yes or No For Motorola systems, shows current