User's Manual

Hit Counts Yes or No Turns the hit counter feature on or off.
Dflt ScanList 0-22 Sets default destination Scan Lists for
new objects and CONV Stor from
Searches, Spectrum Sweeper and
Tune. Use 1-20 for “normal” Scan Lists
1-20. Use 0 for the “ns” (not scanned)
Scan List (no Scan List mappings are
specified). Use 21 for the FAV Scan
List. Use 22 for the SKYWARN Scan
List.
Priority On or Off Turns Priority Scan On or Off. Priority
Scan can also be toggled by pressing
FUNC PRI while scanning.
WxPri Off, 162.40000,
162.42500, 162.45000,
162.47500, 162.50000,
162.52500, 162.55000
Turn off the weather priority. Or, select
weather priority frequency then the
scanner watches selected weather
alert signal.
Scan Lists SEL Enters sub menu for Scan List settings
and status
SRCH L/Outs SEL Enters sub menu for review, editing or
deletion of search lockout frequencies
Clear FAV SEL Press SEL to clear the Favorites Scan
List.
Memory Info SEL Press SEL to see the current memory
usage.
EXPERT BELOW
Tune LED On or Off Activates Signal Strength driven LED
when in TUNE mode.
Color 0-7 Red/Green/Blue (RGB)
value
Sets intensity of red, green and blue
LEDs. Press SEL to edit colors. Use <>
keys to scroll to R, G or B LED settings.
Use numeric keys to activate preset
intensity levels for each LED, or use ^v
keys to fine scroll intensity.
Qtxt1-0 Text value Sets QTXT (QuickText) 0-9 text. Use “$”
to indicate end of text.
Key Repeat On or Off Toggles key repeat mode when a key is
held down
LCD BlinkOff 1-250 x 10 mS For alternating text displays, sets the