User's Manual

Key Beeps On or Off Controls key beeps.
Light Mode Norml, Key, Ignre, On,
Stlth
Controls the backlight operation. Norml
(Normal) uses the backlight key on the
keypad. Key activates the backlight
when any key is pressed. Ignore
activates the backlight when a key is
pressed, and that key's normal function
is ignored if the backlight is off when it
is pressed. On causes the backlight to
remain on all the time. Stlth (Steath)
disables the backlight.
Light Area Both, LCD, Keybd Controls what area is illuminated when
the backlight is on. Both illuminates the
LCD and the keypad, LCD illuminates
the display only. Keybd (Keyboard)
illuminates the keypad only.
Light Secs 1-99 seconds Controls the amount of time the
backlight remains on for Normal, Key
and Ignore light modes
Battery NiMH, Alkaline or NiCad Loads low battery profile for each
different battery type.
Lo Batt Alert 0-60 seconds Controls critical battery audible alert.
0=off.
Battery Info SEL Displays current battery voltage, DAC
value and charge time remaining if
battery is charging.
Atten Mode Global or Normal The attenuator reduces the amount of
signal at the receiver input. This helps
reduce interference from strong nearby
transmitters. Global attenuator mode
applies attenuation radio-wide,
regardless of individual object settings.
In Normal attenuator mode, the
attenuator follows the individual object
attenuator setting.
Global Atten On or Off When the ATTEN mode is set to
Global, this controls whether the Global
attenuator is on or off.
Clear Hits SEL Press SEL to clear all hit counters.