User's Manual

the “Welcome” screen is being displayed, press and release 0, then press and release 2. Press ENT
to confirm the reset of all global parameters to their factory defaults.
NOTE: The Special Global Settings menu (FUNC GLOB) includes parameter settings that, if not set
properly, may adversely affect the performance of your radio. We recommend that users not change the
settings found in the FUNC GLOB menu unless instructed to in this manual or directed to do so by GRE
Technical Support personnel. Should you experience difficulties after changing any of the settings in the
FUNC GLOB menu, you can also restore those settings to factory defaults by pressing the Dflt softkey
associated with each menu line, or following the 0,2 global settings reset procedure described above.
GLOB Menu Reference
The GLOB menu stores all of the radio-wide settings used by the scanner. The GLOB menu allows you to
“tweak” these settings to your liking. The default settings will work fine for most users, but most users will
want to use the GLOB menu to personalize the radio to suit their individual tastes. The active parameter is
always the middle parameter and is indicated by a flashing “:”. The entire GLOB menu is shown below.
Note that some GLOB parameter changes do not take effect until the GLOB menu is saved.
HINT: You can restore all GLOB settings to their defaults without affecting your programmed objects. Power
cycle the radio, then press 0, then 2 during the welcome message display. Press ENT to confirm the GLOB
parameter reset.
GLOB Parameter Options Description
CONTRAST 1-7 Sets LCD contrast. Use <> keys on
5-way pushbutton pad.
Owner SEL Enters sub menu to set Welcome
Message text display.
Font Normal, Bold Sets displayed font. Use <> keys on
5-way pushbutton pad.
Clone Send SEL Press SEL to send data using clone
mode
Alert Mode Both, Tone, Light, Off Controls the ALERT LED and Audible
Alarm behavior. Both allows the LED
and Tone. Tone allows the audible
alarm only. Light allows the LED only.
Off deactivates the ALERT LED and
Audible Alarm feature.
Sound Mode On or Stlth Controls all radio beeps.