User's Manual

Initializing the
File System
Please Wait.....
Then,
File System
Initialized to
Defaults.
Press any key.
5. Press any key on the keypad to proceed. The scanner will next display:
GLOB EEPROM area
Initialized to
defaults.
Press any key.
6. Press any key on the keypad to proceed. The scanner will reboot with file system and global parameters
reset to factory defaults.
Detailed Menu Reference
Your PSR-310 scanner uses GRE's exclusive Object Oriented User Interface, which features a powerful
menu system that is used to configure the various Scannable Objects that your scanner is capable of
receiving. The PSR-310 design also includes a Global Settings (GLOB) menu that provides unprecedented
control over the radio wide settings used throughout your scanner. This section of the manual provides
detailed information about all of the menus and menu parameters.
Each menu parameter features a Dflt softkey that can be used to restore the value to the factory defaults.
This can be very useful if you make a change to a parameter but do not like the result.
HINT: Remember that context sensitive help is available for every menu parameter. Press FUNC SEL to
view help for the selected parameter. Press SEL to exit help.
HINT: It's easy to fix things if you inadvertently change a parameter and then can't remember how to make
it right again. Each parameter includes a Dflt softkey, which, when pressed, restores the factory default
setting for that parameter.
HINT: If you think you've really messed the Global settings up, you can reset every global parameter
back to factory defaults without altering your programmed objects. Turn the radio off, then on again. While