User's Manual

PSR-200U Owner’s Manual Draft
number. If you program this code, press FUNC then press ENT. The code displays with –S,
the code does not entered CTCSS/DCS memory. The code displays without –S, the code
entered CTCSS/DCS memory.
Note: This scanner can store only one code to one channel.
DELAY
Many agencies use a two-way radio system that has a period of several seconds between a
query and a reply. To avoid missing a reply, you can program a 2-second delay into any
channel, or search band/tune range. When your scanner stops on a channel or frequency
with a programmed delay, DLY appears and the scanner continues to monitor that channel
or frequency for 2 seconds after the transmission stops before resuming scanning,
searching, or tuning.
You can program a 2-second delay in any of these ways:
• If the scanner is scanning and stops on an active channel, quickly press DELAY/• before it
resumes scanning.
• If the desired channel is not selected, manually select the channel, then press DELAY/• .
• If the scanner is searching, or tuning, press DELAY/• . DLY appears and the scanner
automatically adds a 2-second delay to every transmission it stops on in that band.
To turn off the 2-second delay in a channel or for all frequency, press DELAY /• while the
scanner is monitoring that channel or frequency. DLY disappears.
LOCKING OUT CHANNELS OR FREQUENCIES
You can increase the effective scanning or search speed by locking out individual channels
or frequencies that have a continuous transmission, such as a birdie frequency (see “Birdie
Frequencies” on Page XX).
Locking Out Channels
To lock out a channel during scanning, press L/O/L/O RVW when the scanner stops on the
channel.
Page 28