User's Manual

PSR-200U Owner’s Manual Draft
CTCSS and DCS icon as follows:
Icon CTCSS DCS
Searching both codes flash flash
Searching CTCSS code flash none
Searching DCS code none flash
Decode the CTCSS displays none
Decode the DCS none displays
Press CT/DC again, the scanner search the CTCSS code. CTCSS icon flashes while search
the code.
Press CT/DC 3 times, the scanner search the DCS code. DCS icon flashes while search the
code.
Press CT/DC 4 times, the scanner returns normal operation. DCS icon disappears.
If you want to confirm the decoded CTCSS/DCS code, press FUNC then CT/DC.
Programming CTCSS/DCS Setting into Channel Memory
1. Manually select the channel when you program the code, then press PGM.
2. Press CT/DC. Ct dC-Srch appears and DCS/CTCSS icon flashes. Press ENT to store
CTCSS/DCS code search setting into this channel.
3. Press CD/DC again. Ct-Srch appears and CTCSS icon flashes. Press ENT to store
CTCSS code search setting into this channel.
4. Press CT/DC 3 times. dC-Srch appears and DCS icon flashes. Press ENT to store DCS
code search setting into this channel.
5. Press CT/DC 4 times. Ct dC-OFF appears. Press ENT to clear the CTCSS/DCS setting.
If the scanner decode the code, press FUNC then press CT/DC to show the decoded code
Page 27