User's Manual

PSR-200U Owner’s Manual Draft
3. Press PGM. PGM appears.
4. Press FUNC then CLEAR/PSE. The frequency number changes to 000.0000 to indicate
the channel is cleared.
5. To clear another channel, use the number keys to enter that channel number (1–200),
then press PGM again. Or, repeatedly press PGM until the desired channel number appears.
Then repeat Step 4.
FM RADIO OPERAION
The operation method has neither SCAN/MANUAL mode nor the change also by FM Radio
mode.
A operation method is shown in the following.
Tune Operation in the FM Radio Mode
1. Press FM RADIO to enter FM Radio mode.
2. If the scanner’s display shows channel number, press TUNE.
3. Press PSE to start tune.
To change the tune direction, press v or ^.
To program tuned broadcast into FM Radio Channel
1. Press FUNC.
2. Press ENT to store the lowest FM Channel memory.
Or press PGM to select FM channel number. (See “Copying a Frequency into a Specified
Channel” for more details.) Then press ENT.
Monitoring Stored FM Radio Channel
In FM Radio mode, there is little thing that becomes interrupted the broadcast and scans to
the advanced channel, and operate the channel by the manual operation, please.
Page 22