User's Manual

PSR-200U Owner’s Manual Draft
and –dUPL– appears. If you want to store the frequency anyway, press ENT again. Press
CLEAR/PSE to clear the frequency.
• Press DELAY if you want the scanner to pause 2 seconds on this channel before it
proceeds to the next channel after a transmission ends (see “Delay” on Page XX). The
scanner also stores this setting in the channel.
5. To program the next channel in sequence, press PGM and repeat Steps 3 and 4.
FINDING AND STORING ACTIVE FREQUENCIES
Searching the Service Search Band
You can search for transmissions in the scanner’s preprogrammed search bank. The search
bank is divided into four search bands.
Notes:
• You can use the scanner’s delay feature while searching the banks, see “Delay” on Page
XX.
• The scanner does not search locked-out frequencies while searching ranges. See “Locking
out Channels or Frequencies”.
The scanner contains these preprogrammed search ranges, stored in the search bank.
Emergency (Fire/Police)
Aircraft
Ham
Marine
Follow these steps to select preprogrammed search bands and search them for active
frequencies:
1. Repeatedly press SRCH (Orange) to select your desired search bank (Fire/Police, Aircraft,
Ham, or Marine).
Note: If you want to listen to marine band, see “Listening to Marine Band”.
Page 17