User's Manual

PSR-200U Owner’s Manual Draft
3. Turn VOLUME clockwise until you hear a hissing sound.
4. Turn SQUELCH clockwise, just until the hissing sound stops.
Notes:
• To listen to a weak or distant station, turn SQUELCH counterclockwise. If reception is poor,
turn SQUELCH clockwise to cut out weak transmissions.
• If SQUELCH is adjusted so you always hear a hissing sound, the scanner will not scan or
search properly.
5. To turn off the scanner when you finish, slide POWER to OFF.
STORING KNOWN FREQUENCIES INTO CHANNELS
Follow these steps to store frequencies into channels.
1. Press SCAN (Orange).
Note: If you want to program FM broadcast into channel, press FM RADIO.
2. Press PGM, then PGM appears. Enter the channel number (1–200; If you enter FM
RADIO mode, 1-20) where you want to store a frequency, then press PGM again.
3. Use the number keys and • to enter the frequency (including the decimal point) you want
to store.
4. Press ENT to store the frequency into the channel.
Notes:
• If you made a mistake in Step 3, Error appears and the scanner beeps three times when
you press ENT. Simply start again from Step 3.
• Your scanner automatically rounds the entered frequency down to the closest valid
frequency. For example, if you enter a frequency of 151.451, your scanner accepts it as
151.450.
• If you entered a frequency that is already stored in another channel, the scanner beeps
three times and displays the lowest channel number where the frequency is already stored,
Page 16