User's Manual

PSR-200U Owner’s Manual Draft
7-Digit number Indicates receiving frequency, error messages, etc.
L/O (lockout) Appears when you manually select a channel that was previously locked
out during scanning or when you review a locked-out frequency.
DCS Appears when your scanner decodes DCS code.
CTCSS Appears when your scanner decodes CTCSS code.
^/v Indicates the search or scan direction.
PRI Appears when the priority feature is turned on.
MAN Appears when you manually select a channel.
SCAN Appears when the scanner scans channels.
SRCH Appears during service bank searches.
S Appears with 8-digit bar that shows receiving signal strength.
PGM Appears when you program frequencies into the scanner’s channels.
DLY Appears when you program a 2-second delay.
ALL CH L-out Appears when you lock out the all marine channels.
b X Ch-FULL Appears when you try to enter a frequency during a search when all
displayed bank’s channels are full.
b X StorE Appears when you program the frequency into desired vacant channel.
CLOnE Appears when the scanner stays in the clone mode.
-dUPL- Appears when you try to store a frequency that is already stored in another
channel.
Error Appears when you make an entry error.
FLo ALL-CL Appears when you remove all the locked-out frequencies during a
FD/PD, AIR, or HAM band.
L-r Appears when you review the locked-out frequencies.
L-O Fr-FULL Appears when you try to lock out a frequency during a FD/PD, AIR, HAM,
or tune when 50 frequencies are already locked out.
oFF tonE Appears when you turn the key tone off.
On tonE Appears when you turn the key tone on.
P Appears when the scanner is tuned to the priority channel.
-t- Appears during a tune mode.
MAr Appears about 2 seconds when you select marine band.
FIrE Appears about 1 seconds when you select FD/PD band.
POLICE Appears about 1 seconds when you select FD/PD band.
AIr Appears about 2 seconds when you select AIR band.
HAM Appears about 2 seconds when you select HAM band.
Page 11