User's Manual

New Race Scanner Owner’s Manual Draft
If you make mistake, press CLR to delete all. Then enter your entry from first.
Cellular Phone Operation
You can catch and talk your mobile phone with optional headset. To use this feature, you
may connect headset and your cellular phone to your scanner. (To connect your cellular
phone, use supplied Phone-Scanner connection cable.)
Your phone rings the call bell, catch the call with phone’s CALL button. Then press
MON/PHONE key to connect the cellular phone and your headset so transmission
disconnect to your headset.
Note: This feature functions only A side jack. B side jack works to monitor the
transmissions.
Cloning the Data
You can transfer your scanner’s data to and from another PSR-110 scanner using an
optional connecting cable with 1/8-inch (3.5mm) stereo (TRS) phone plugs on both ends
(not supplied).
1. Turn on both scanners.
2. Connect the connecting cable to each scanner’s PC/IF jack.
3. Press EDIT at both scanners.
4. Select CLONE with rotary selector at both scanner.
5. Select RECEIVE then press ENT at target scanner.
6. Select SEND with rotary selector at host scanner.
7. Press ENT at host scanner to send the data. To exit the clone mode, remove the cable
Page
15