User's Manual

New Race Scanner Owner’s Manual Draft
3. Press 1 to edit the frequency, or 2 to cancel the frequency edit.
4. Enter car (or MRN channel) number, then press ENT. If the displayed number is correct,
press ENT.
5. Enter new frequency. (Decimal point automatically add to the frequency.) Then press
ENT.
Note: If you have mistake the frequency entry, ERROR INVALID INPUT appears. Press
CLR, then retry the frequency entering.
6. Enter new TAG. Refer to the “Text Input Method” for entering the text input method. You
can entry for 12 characters into TAG. Then press ENT. The scanner changes your
changing.
PAGE TAG Edit
If you select PAGE TAG, you can change the race series tag. Enter new tag using number
(and FUNC) key. Press ENT to store new entry.
FAV Edit
If you select FAV, you can clear the favorite channel memory. Select channel number using
rotary selector, then press ENT. The channel memory clears.
Setting
If you select Setting menu, following sub-menu appears:
SQ (Squelch Level setting)
Key Tone (Key Tone on/off setting)
Power Save (Power Save function on/off)
Display (Contrast or set on/off the receiving frequency showing)
Page
11