User's Manual

20-444 User’s Guide Draft
race series (6-series)
with rotary selector. After selection, press ENT to call your selected race
series data.
Volume Setting
1. Press FUNC. FUNC appears on the top left corner.
2. Rotate rotary selector to clockwise to increase; counterclockwise to decrease while FUNC
appears. Volume level displays top right corner.
Car Number Operation
If you press CAR, the scanner enters car number operation mode. In this mode, you can access
directly entering car number. Or, you can select using rotary selector to upward or downward the
car number.
Press and hold CAR about 1 second to scan the car number channel. If the scanner find
transmission, scan stops and monitor that car number transmission. If the transmission ends,
the scanner continues the scan.
MRN (Motor Racing Network) Operation
If you press MRN, the scanner watches MRN channel (directly accesses circuit radio). Press
and hold MRN, the scanner scans pre-programmed other channels (Control Tower Radio,
Safety Radio, etc.)
Favorite Operation
Your scanner has 10 favorite channel memory (1-0).
To program your favorite radio to the scanner as follows:
1. Press FAV while you receive favorite driver (or channel).
Page
9