User's Manual

20-444 User’s Guide Draft

Cellular Pho

ne Operation

You can catch and talk your phone with optional headset. To use this feature, you may connect

headset and your cellular phone to your scanner. (To connect your cellular phone, use optional

Phone-Scanner connection cable.)

Your phone rings the call bell, catch the call with phone’s CALL button. Then press

MON/PHONE key to connect the cellular phone and your headset so transmission disconnect

to your headset.

Note: This feature functions only A side jack. B side jack works to monitor the transmissions.

Cloning the Data

You can transfer your scanner’s data to and from another PRO-444 scanner using an optional

connecting cable with 1/8-inch (3.5mm) stereo (TRS) phone plugs on both ends (not supplied).

1. Turn on both scanner.

2. Connect the connecting cable to each scanner’s PC/IF jack.

3. Press EDIT at both scanner.

4. Select CLONE with rotary selector at both scanner.

5. Select RECEIVE then press ENT at target scanner.

6. Select SEND with rotary selector at host scanner.

5. Press ENT at host scanner to send the data. To exit the clone mode, remove the cable and

press EDIT.

Note: ERROR!! Erasing DATA!! appears if the scanner cable removes the PC/IF jack. To cancel

Page