User's Manual

200018 User’s Guide Draft
c
omputer and scanning. Disconnect the radio from the computer, wait a
few seconds, then reconnect.
03-08
Unknown MicroSD card read/write error
Reinsert the MicroSD card to ensure it is fully inserted in locked
in the MicroSD slot. If necessary, reformat the MicroSD card using the PC
Application “Prepare SD Card for use” option. Replace the MicroSD card if
the problem persists.
04-00
Initialization error
Contact RadioShack Support and provide error code information
04-01
Initialization error
Contact RadioShack Support and provide error code information
04-02
Firmware load error
Contact RadioShack Support and provide error code information
05-00
Unable to load CONFIG__.BIN
Reformat the MicroSD card using the PC Application “Prepare
SD Card for use” option. Replace the MicroSD card if the problem
persists.
05-01
CONFIG__.BIN file error
Reformat the MicroSD card using the PC Application “Prepare
SD Card for use” option. Replace the MicroSD card if the problem
persists.
05-02
CONFIG__.BIN file error
Reformat the MicroSD card using the PC Application “Prepare
SD Card for use” option. Replace the MicroSD card if the problem
persists.
05-03
CONFIG__.BIN file error
Reformat the MicroSD card using the PC Application “Prepare
SD Card for use” option. Replace the MicroSD card if the problem
persists.
Birdie Frequencies
Every scanner has birdie frequencies. Birdies are signals created inside the scanner’s receiver, which
may interfere with transmissions on the same frequencies If you program one of these frequencies,
you hear only noise on that frequency. If the interference is not severe, you might be able to turn
Squelch clockwise to omit the birdie.
To find the birdies in your scanner, disconnect the antenna and move it away from the scanner. Make
Page
42