User's Manual

200018 User’s Guide Draft
02-01
Unknown
TSYS type in data
Use PC Application to delete any corrupted TSYS objects or
create a new configuration
03-00
No MicroSD Card inserted
Ensure that a properly formatted MicroSD card is fully inserted
and locked in the MicroSD slot.
03-01
General error initializing file system
Reinsert the MicroSD card to ensure it is fully inserted in locked
in the MicroSD slot. If necessary, reformat the MicroSD card using the PC
Application “Prepare SD Card for use” option. Replace the MicroSD card if
the problem persists.
03-02
Cluster size bad
Reinsert the MicroSD card to ensure it is fully inserted in locked
in the MicroSD slot. If necessary, reformat the MicroSD card using the PC
Application “Prepare SD Card for use” option. Replace the MicroSD card if
the problem persists.
03-03
Error reading MicroSD card
Reinsert the MicroSD card to ensure it is fully inserted in locked
in the MicroSD slot. If necessary, reformat the MicroSD card using the PC
Application “Prepare SD Card for use” option. Replace the MicroSD card if
the problem persists.
03-04
Error writing MicroSD card
Reinsert the MicroSD card to ensure it is fully inserted in locked
in the MicroSD slot. If necessary, reformat the MicroSD card using the PC
Application “Prepare SD Card for use” option. Replace the MicroSD card if
the problem persists.
03-05
MicroSD Card is full
Reduce size of configuration, remove unnecessary files or
switch to a MicroSD card with more capacity.
03-06
MicroSD Card is write protected
Reinsert the MicroSD card to ensure it is fully inserted in locked
in the MicroSD slot. If necessary, reformat the MicroSD card using the PC
Application “Prepare SD Card for use” option. Replace the MicroSD card if
the problem persists.
03-07
Mass storage mode is active
Under normal conditions this error should not appear. Mass
storage device mode is disabled when the scanner is connected to a
Page
41