User's Manual

200018 User’s Guide Draft
Y
our PRO-18 can automatically update the objects that you have programmed with the most current
Library data, to ensure that any changes made to the RadioReference database by its users are
carried over to your scanner’s programming. Examples of these types of changes may include the
following:
. Updates made to the RadioReference database to provide more descriptive names for the talkgroups
on a trunked radio system
. Updates made to the RadioReference database to incorporate changes CTCSS programming for a
conventional channel by a radio system operator
You should use the PRO-18 PC Application to download the latest Library data and move it to your
radio’s MicroSD Card on a routine basis to ensure that you have the latest RadioReference data in
your Library. As you browse and pick new objects for your programming, you can be confident that
your programming will be based on current Library data.
Additionally, the Update from Library command in the Main Menu can be used to automatically
updated the objects you have already programmed to the latest version of the Library data, so you
never have to worry about missing changes that may be made in the RadioReference data from time
to time.
To use this feature, first connect your PRO-18 to an external power supply. The PRO-18 will not begin
the Update from Library process unless the radio is connected to an external power source. Once the
radio is connected to an external power source, select the Update from Library command from the
Main Menu. The PRO-18 will update all programmed objects with the latest data from the Library.
Note that the Update from Library operation can take a long time to complete. Interrupting the update
process before it is finished may result in corrupted data.
Troubleshooting
Should you experience difficulty with the PRO-18, please refer to the following troubleshooting guide
for assistance.
The scanner does not function
Ensure that the PRO-18 is equipped with fresh batteries. If powering the PRO-18 from external power,
make certain that the USB power plug is fully inserted into the PRO-18’s USB jack.
Low battery warning beeps and message on LCD display
Recharge rechargeable batteries or replace alkaline batteries. Ensure that the battery type selection
switch in the battery compartment is set to the correct battery type.
Poor or no reception
Weak signals from distant stations. Reposition for best reception.
Attenuator in use on weak signals. Check performance with and without attenuator activated, use
Page
39