User's Manual

200018 User’s Guide Draft
Ma
in Menu
Navigates to the PRO-18’s Main Menu
Search Menu
Navigates to the Search Menu
Store Channel
Stores a found frequency as an object in the first playlist
Cancel Changes
Exits the Limit Search Menu without saving any changes
Save Changes
Saves your changes and exits the Limit Search Menu
Attenuator
When checked, attenuation is enabled when using Limit Search. Attenuation limits the effective range
of Limit Search and may help reduce interference from strong local transmitters. Use ▶/II/SEL to toggle
Attenuator status.
Zeromatic
Enables or disables the PRO-18’s Zeromatic circuit. Zeromatic helps the PRO-18 tune to exact
frequencies when searching. Use ▶/II/SEL to toggle Zeromatic enabled/disabled status.
Delay
Enables or disables delay when using the Limit Search feature. When delay is enabled, the PRO-18
waits for two seconds after a transmission to receive reply traffic before resuming search. Use ▶/II/SEL
to toggle delay enabled/disabled status.
Lo
Sets the lower frequency for the Limit Search frequency range. Press ▶/II/SEL, then follow the
on-screen instructions to edit and save the lower frequency.
Hi
Sets the upper frequency for the Limit Search frequency range. Press ▶/II/SEL, then follow the
on-screen instructions to edit and save the upper frequency.
To store found object in playlists:
1. Press MENU when you find a frequency you want to store.
2. Select Store Channel.
3. Press SEL. The new object is added to the first playlist and has the alpha tag “Stored Search.”
Note: To move the new object to another playlist or edit the alpha tag, use the Object Edit menu (see
page XX) or the PC Application (see page XX).
Page
36