User's Manual

200018 User’s Guide Draft
Lite
Time
Controls the amount of time the backlight stays on.
LiteLevel
Controls the brightness of the backlight
Welcome Text 1-5
Sets the text displayed on five lines of the display when the PRO-18 is first turned on.
Blink Time 1-2
For alternating display elements, controls the amount of time each item is displayed.
Show Radio ID
When enabled, displays the individual Radio ID if it is available for trunk radio systems that use the
Radio ID feature. Simple Display must be unchecked.
Use RID Alert
When enabled, displays and/or plays the audible alert settings associated with a specific Radio ID
when that Radio ID becomes involved in a call.
Show VC/CC
When enabled, displays the voice channel and control channel frequencies on the LCD display. Simple
Display must be unchecked. Show Radio ID will override Show VC/CC if a Radio ID is available.
Show TGID
When enabled, shows the Talkgroup ID with talkgroup calls. Simple Display must be unchecked.
Show Site Name
When enabled, shows the Site Name for the trunking site being used for the current talkgroup call.
Simple Display must be unchecked. Site Name is only displayed if there are two or more sites
programmed for the trunking system.
CONV TGID
When enabled, shows the Talkgroup ID for P25 Conventional Talkgroup calls. Simple Display must be
unchecked.
CONV Radio ID
When enabled, shows the Radio ID for P25 conventional calls. Simple Display must be unchecked.
PC/IF CCDump
When enabled, streams ASCII Control Channel Dump data over the USB interface when the radio is
tuned to a trunking control channel.
to file
When enabled, stores ASCII Control Channel Dump data to the MicroSD card when the radio is tuned
to a trunking control channel.
Page
25