User's Manual

200018 User’s Guide Draft
G Atten
On
Activates the Global Attenuation.
Search Dg AGC
When checked, applies Digital AGC to digital transmissions received while searching.
G AGC Mode
When checked, sets Global AGC Mode on. With Global AGC on, digital AGC is controlled by the G
AGC On setting below, instead of the per-object AGC setting. With G AGC Mode off, Digital AGC is
controlled by the per object settings.
G AGC On
When checked, and when G AGC Mode is enabled, activates AGC for all incoming digital
transmissions regardless of per-object setting. When unchecked, and when G AGC Mode is enabled,
deactivates AGC for all incoming digital transmissions regardless of per-object setting.
Sounds
Controls all beep and alert sounds used by the radio. When set to On, the radio will play all sounds as
defined by their individual settings. When set to Stealth, the radio will not play any alerts or key beep
sounds.
Alerts
Controls audible alert. When set, audio alerts will be produced. When set to Off, no audio alerts will be
produced.
Key Beeps
Enables or disables Key Beep sounds.
Beep Volume
Controls the volume of Key Beep sounds.
Alert Volume
Controls the volume of object alert sounds.
Contrast
Sets the contrast of the LCD display.
LModeBAT
Sets the backlight mode to On, Stealth, Normal, Key, or Ignore when operating under battery power.
LModeEXT
Sets the backlight mode to On, Stealth, Normal, Key, or Ignore when operating under external power.
LiteArea
Controls whether the LCD, keypad or both should be illuminated when the backlight is active.
Page
24