User's Manual

200018 User’s Guide Draft
Dele
te Object
Selecting Delete Object removes the object from the PRO-18’s working memory configuration. The
Library data is never altered in any way, so if necessary, the object can be imported to the PRO-18’s
Playlists again.
To delete the current object, use  and  to scroll to Delete Object, then press  to proceed with the
deletion. Follow the on-screen instructions to confirm Delete Object.
Changing PRO-18’s Settings
Use the Settings Menu to customize PRO-18’s factory default settings. To access the Settings Menu,
press MENU until the Main Menu appears, scroll to Settings, and press .
Main Menu
Jumps to the Main Menu
Back
Jumps back (typically to the Main Menu)
Save Changes
Saves the changes you’ve made to the Settings options.
Default Vals
Restores radio settings to factory defaults without affecting programming data.
Simple Display
By default, the PRO-18 operates with a simplified display that only shows object and Playlist names.
To see more information about objects, disable this option. This option must be unchecked to view
detailed frequency, talkgroup ID, Radio ID or CTCSS and DCS squelch code information.
Default PL
Sets the Default Playlist. Objects imported from the Library, and new frequencies found with the
Search modes or the Signal Stalker II are automatically mapped to the Default Playlist.
Priority Mode
Enables Priority Mode. Objects that are with Priority enabled in the Object Menu will be checked more
frequently for activity, giving them priority over objects that do not have Priority enabled.
Priority Time
Controls how frequently conventional channel priority objects are checked.
G Atten Mode
Enables or disables Global Attenuator mode. When Global Attenuator is enabled, the PRO-18 applies
attenuation to every object and search regardless of individual object attenuation settings when Global
Attenuation is turned on.
Page
23