User's Manual

Controls whether the LCD, keypad or both should be illuminated
when the backlight is active.
LiteTime
Controls the amount of time the backlight stays on.
LiteLevel
Controls the brightness of the backlight and the Alert LED
Welcome Text 1-5
Sets the text displayed on five lines of the display when the
PSR-800 is first turned on.
Blink Time 1-2
For alternating display elements, controls the amount of time
each item is displayed.
Show Radio ID
When enabled, displays the individual Radio ID if it is available
for trunk radio systems that use the Radio ID feature. Simple
Display must be unchecked.
Use RID Alert!
When enabled, displays and/or plays the visual and audible alert
settings associated with a specific Radio ID when that Radio ID
becomes involved in a call.
Show VC/CC
When enabled, displays the voice channel and control channel
frequencies on the LCD display. Simple Display must be
unchecked. Show Radio ID will override Show VC/CC if a Radio
ID is available.
Show TGID
When enabled, shows the Talkgroup ID with talkgroup calls.
Simple Display must be unchecked.
Show Site Name
When enabled, shows the Site Name for the trunking site being
used for the current talkgroup call. Simple Display must be
unchecked. Site Name is only displayed if there are two or more
sites programmed for the trunking system.
CONV TGID
PSR-800 User Manual! Page 71