User's Manual

Defines an audible alarm that is heard whenever there is activity
on the object. Use the  or  keys to select the desired alarm
sound.
Light
Defines backlight behavior for the selected object. Use the  or
 keys to select the desired light behavior. Options are Leave
(use default backlight settings), On (turn the backlight on) or
Flash (flash the backlight according to the Flash Pattern setting).
Flash Pattern, On Time, Off Time
Flash Pattern defines the pattern that is used for this object when
the Light mode is set to Flash. Flash Pattern also defines the
flash pattern that is used by the Alert LED if it is enabled. Each
object uses a 32 step Flash Pattern. Each step in the 32 step
flash pattern defines whether the backlight is on or off for the
durations specified in the On Time and Off Time settings below.
The 32 step Flash Pattern consists of eight blocks with four steps
for each block. The Flash Pattern within a four step block is
defined using the characters 0-9 and A-F. Figure 11 illustrates the
16 flash patterns for each four step block.
0:" ◎" ◎" ◎" ◎
1:" ◎" ◎" ◎" ◉
2:" ◎" ◎" ◉" ◎
3:" ◎" ◎" ◉" ◉
4:" ◎" ◉" ◎" ◎
5:" ◎" ◉" ◎" ◉
6:" ◎" ◉" ◉" ◎
7:" ◎" ◉" ◉" ◉
8:" ◉" ◎" ◎" ◎
9:" ◉" ◎" ◎" ◉
A:" ◉" ◎" ◉" ◎
B:" ◉" ◎" ◉" ◉
C:" ◉" ◉" ◎" ◎
D:" ◉" ◉" ◎" ◉
E:" ◉" ◉" ◉" ◎
F:" ◉" ◉" ◉" ◉
PSR-800 User Manual! Page 65