User's Manual

Pick objects from the Library
When you find an object or group of objects that you want to
monitor, you “pick” them by selecting them, which marks them for
the Import objects to Scanlists step.
Import objects to Scanlists
Finally, when you have picked the objects you want to import,
you complete the operation by selecting one or more Scanlists
where you would like the selected objects to be imported. The
PSR-800 will map your objects to the Scanlists you have
selected.
Basic Step by Step Programming Instructions
Browsing the Library
Press and hold the button for one second to turn the PSR-800
on. The PSR-800 will display the Main Menu, or resume
operations in the last mode that was used when the radio was
turned off. If necessary, press the MENU key until the Main Menu
appears. Use the  and  keys to scroll to the Browse Library
menu item, then press the  key to advance to the next step,
Select Country.
Use the  and  keys to scroll to your desired country, then
press the  key to advance to the next step.
Use the  and  keys to scroll to your desired state/province,
then press the  key to advance to the next step.
At this point there will typically be three options to choose from,
Agencies, Counties/Cities and Systems.
RadioReference uses Agencies under the State level to group
agencies with statewide responsibilities, such as state troopers
or highway patrol agencies, state emergency management
agencies, highway departments, state parks and departments of
forestry, etc. If you wish to explore Agencies for these types of
users, scroll to Agencies and press the  key to proceed to the
next step.
RadioReference uses Counties/Cities to group radio systems
that are used in a local county or independent city. If you wish to
explore the radio systems used in counties and independent
cities, scroll to Counties/Cities and press the  key to proceed
to the next step.
PSR-800 User Manual! Page 33