User's Manual

s=skip off, S=skip on, L=lockout on
d=delay off, D=delay on
r=recording off, R=recording on
Display Icons
In the Individual Object displays, a row of icons at the top of the
display provides status information about the scanner. The top
row of icons are defined as follows:
" PSR-800ʼs squelch circuit (or “gate”) is open.
" Signal meter indicating strength of the received signal.
IF
" The radioʼs IF (discriminator) output mode is active.
" The scanner is currently receiving trunking control channel
data, or, when monitoring a voice channel, flashes to
indicate reception of embedded low-speed trunking data
from the voice channel.
" When present, the attenuator is set for Global mode.
" When present, the attenuator is active.
" When present, Global attenuator is on, and the attenuator
is active.
AM
" AM mode is active.
FM
" FM mode is active
NF
" Narrow FM mode is active
DG
" The radio is receiving P25 digital audio with AGC.
Dg
" The radio is receiving P25 digital audio without AGC.
E
" Encrypted digital traffic detected.
PSR-800 User Manual! Page 23