User's Manual

improperly formatted or missing, the EZ Scan-SD will report one
or more of the following errors:
Unable to get an initialization response from the SD Card at power-up:
No SD Card found
Unable to read valid low-level file system information (partition tables, etc.)
from installed SD Card at power-up:
No file system on SD Card
SD Card has a cluster size other than 32kB – 32kB is required by EZ Scan-
SD:
Bad file system: 32k clusters required
Unrecoverable error reading the SD Card. Power-cycle may resolve:
SD Read Error
Unrecoverable error writing the SD Card. Power-cycle may resolve:
SD Write Error
The SD Card has no more free space:
SD Card Full!
EZ Scan-SD’s Main Menu
The heart of the EZ Scan-SDʼs user interface is the Main Menu,
where all of the major functions are controlled. The following
options are available in the Main Menu:
Play
Begins playback (scanning) of imported objects in enabled
Playlists. Use the  or ▶/II/SEL keys to activate Play mode.
Browse Objects
Enters Playlist Browse mode, which allows you to browse the
objects that you have imported into Playlists. Use the  or
▶/II/SEL keys to activate Playlist Browse mode.
Playlists
Accesses the Playlists utility to enable, disable or rename
Playlists. Use the  or ▶/II/SEL keys to proceed to the next step,
then use the  and  keys to scroll select a Playlist to modify.
Press the ▶/II/SEL key to toggle enabled/disabled status, or
press the  and follow the on-screen instructions to rename.
GENERAL RESEARCH OF ELECTRONICS, INC. PROPRIETARY AND CONFIDENTIAL INFORMATION
EZ Scan-SD Preliminary User Manual" Page 39