User's Manual

When using other SD Cards the following formatting guidelines
should be used:
•
Any card with 2GB or less capacity should be formatted using
the FAT file system with a cluster size of 32kB.
•
Any SD Card with greater than 2GB of capacity should be
formatted using the FAT32 file system with a cluster size of
32kB.
For reference, here is the directory structure for the EZ Scan-
SDʼs SD Card. You may wish to make a copy of the CDAT folder
on your computer as a backup. Modifying these directories or
their contents is not recommended, and may cause the EZ Scan-
SD to malfunction.
BTMP
Contains various temporary files used by the EZ Scan-SD while
it is running
CDAT
Contains your EZ Scan-SD programming
CDAT_VS.nnn
Contains EZ Scan-SD programming for V-Scanner folder number
nnn, where nnn may range from 001 to 200
DB
Contains the Library
MTMP
Contains various temporary files used by the EZ Scan-SD while
it is running
STMP
Contains various temporary files used by the EZ Scan-SD while
it is running
WARNING:! Modifying these directories or their contents is not
! recommended, and may cause the EZ Scan-SD to
! malfunction, or may result in loss of programming data.!
SD Card error messages
The EZ Scan-SDʼs SD Card must be formatted correctly for
proper operation. If the SD Card is corrupted, defective,
GENERAL RESEARCH OF ELECTRONICS, INC. PROPRIETARY AND CONFIDENTIAL INFORMATION
EZ Scan-SD Preliminary User Manual" Page 38