User's Manual

indicates that the object is locked out. See the Editing Objects
section under More EZ Scan-SD Features below.
Scan Resume
To resume scanning when the EZ Scan-SD is stopped on an
active object without skipping the object, press the  or  keys.
The EZ Scan-SD will interrupt the current transmission and begin
scanning again, but will continue to receive further transmissions
on the object.
More EZ Scan-SD Features
EZ Scan-SD PC Application
Your EZ Scan-SD includes a powerful EZ Scan-SD PC
Application You should use the EZ Scan-SD PC Application for
the following operations:
•
Updating the Library to the most current version
•
Formatting and maintaining the SD Card
•
Making changes to the EZ Scan-SDʼs programming and
configuration
•
Defining and saving V-Scanner II (VS-II) configurations
•
Updating the EZ Scan-SDʼs firmware for enhancements and
bug fixes
Please refer to the EZ Scan-SD PC Applicationʼs Help system for
details on using the EZ Scan-SD PC Application.
SD Card
Your EZ Scan-SD ships with a 2 GB SD Card already formatted,
installed and ready for use.
You can remove the SD Card from the EZ Scan-SD and connect
it to your computer, where you can access the card with the EZ
Scan-SD PC Application and update the Library, edit the EZ
Scan-SDʼs configuration and stored objects, optimize the card,
and reformat the card if necessary. You can also purchase
additional cards, format them for use with the EZ Scan-SD, then
use them to store different configurations or backups.
GENERAL RESEARCH OF ELECTRONICS, INC. PROPRIETARY AND CONFIDENTIAL INFORMATION
EZ Scan-SD Preliminary User Manual" Page 36